FRIENDLY CITY AUTO CARE
703 W Madison Ave. Athens TN 37303 423-745-3533
423-745-3533 703 W Madison Ave Athens TN 37303
Towing Equipment
A FLEET WE CAN BE PROUD OF!
2012 FLEET!
2011 F650 ROLLBACK! Another truck purchased from Crouch's Wrecker Sales. This truck has a Miller Industries LCG bed. From the first use we knew this was a great bed. This truck was purchased to replace our International which we sold a few months ago. This truck has an extended cab like our other ones. We have extended our coverage area for some of the motor clubs and we wanted to be sure that we had room for customers for every call if needed.
The LCG bed is 102" wide so we can load dual wheel trucks without any problem at all and the low center gravity feature makes it easy to load lowered vehicles easily as well.
Thank you Bob Crouch for the great job and for meeting us on New Year's Eve to pick up the truck. Thanks once again to Miller Industries, a company that always delivers and always has a great product. Of course we have to thank Brent from KP Graphics for the lettering and graphics--you always do a great job and get it done quickly.
2011 DODGE 5500 ROLLBACK. This is another great purchase from Crouch's Wrecker Sales. Bob did a great job with the frame stretch and bed installation. This crew cab is great for all of our customers traveling with others.
Number 20 in the fleet, the Dodge has a steel Century bed with blade rails. We had a air compressor added for tire services and a roadside kit with all of the essentials.
Thanks this time to Bob at Crouch's, Miller Industries and again KP Graphics for the best lettering and graphics.
2010 FORD F650 Rollback. This truck was purchased as a replacement for Gemini 1, our 06 Freightliner Rollback. Though we will miss G1, this new truck seems very promising. This truck is equipped with a Century Right-Approach bed and it has been great to use so far. This truck also has remote controls for the bed and the winch system. This is also a joy to use.
Thanks go once again to Bob at Bob Crouch's Wrecker service, Larry Curry at Miller Industries, and Brent Miller of KP Graphics.
1999 Volvo Road Tractor. Purchased from Venture Express (it was white) and painted by our owner, Robert Millsaps. This truck was purchased for pulling in loads from broken down truck and delivering them to a safe location of the trucker's and/or company's choice.
SEE PHOTO BELOW!
2001 Kenworth T800 (BIG KENNY) W/Century 7035 Wrecker bed & Wheel Lift along with underlift/ axle lift and 35 Ton intergrated boom & dual 35000 lb winches. It has a N14 460 hp Cummins engine and a 13 speed transmission.
Thanks go out to Bob Crouch at Crouch's Wrecker Sales, Jerry Riggs at Hillbilly Harriett's Chrome Shop (for all of the chrome), Jesse & Jane Phillips at Napa Auto Parts (for the hoses, paint, and other odds & ends), Brent Miller at KP Graphics (for another great job of lettering & graphics) and Larry Curry at Miller Industries.
This truck was purchased on October 30, 2007. This day has another special meaning to us, it is the birth date of our father, Lee Anderson Millsaps and this year would have been his 90th birthday. Big Kenny is being dedicated in loving memory of Daddy because he was of great help in getting us started and throughout the early years of our business.
We are using this truck for towing broken down trucks and motor homes, as well as for wreck recoveries and winching. We love serving you, our customers, with the same professionalism that we strive to deliver every year.
2003 Kenworth T300 (LITTLE KENNY) W/ Vulcan 897 Wrecker bed and Wheel Lift along with underlift/axle lift. It has a Cummins engine and 6 speed transmission.This truck is used for winching out vehicles accident recovery and towing cars, light to medium duty disabled straight trucks and motor homes.We have had it since October of 2005 .
Kenny has been running calls all over the southeast U.S. and it has traveled as far as Dodge City KS. Although it isn't used as much, it is an important part of our fleet.
This truck has been a great truck and the Cummins engine has operated extremely well. Thumbs up to Kenworth, Cummins and Miller Industries.
.2012 FLEET!
2011 F650 ROLLBACK! Another truck purchased from Crouch's Wrecker Sales. This truck has a Miller Industries LCG bed. From the first use we knew this was a great bed. This truck was purchased to replace our International which we sold a few months ago. This truck has an extended cab like our other ones. We have extended our coverage area for some of the motor clubs and we wanted to be sure that we had room for customers for every call if needed.
The LCG bed is 102" wide so we can load dual wheel trucks without any problem at all and the low center gravity feature makes it easy to load lowered vehicles easily as well.
Thank you Bob Crouch for the great job and for meeting us on New Year's Eve to pick up the truck. Thanks once again to Miller Industries, a company that always delivers and always has a great product. Of course we have to thank Brent from KP Graphics for the lettering and graphics--you always do a great job and get it done quickly.
2011 DODGE 5500 ROLLBACK. This is another great purchase from Crouch's Wrecker Sales. Bob did a great job with the frame stretch and bed installation. This crew cab is great for all of our customers traveling with others.
Number 20 in the fleet, the Dodge has a steel Century bed with blade rails. We had a air compressor added for tire services and a roadside kit with all of the essentials.
Thanks this time to Bob at Crouch's, Miller Industries and again KP Graphics for the best lettering and graphics.
2010 FORD F650 Rollback. This truck was purchased as a replacement for Gemini 1, our 06 Freightliner Rollback. Though we will miss G1, this new truck seems very promising. This truck is equipped with a Century Right-Approach bed and it has been great to use so far. This truck also has remote controls for the bed and the winch system. This is also a joy to use.
Thanks go once again to Bob at Bob Crouch's Wrecker service, Larry Curry at Miller Industries, and Brent Miller of KP Graphics.
1999 Volvo Road Tractor. Purchased from Venture Express (it was white) and painted by our owner, Robert Millsaps. This truck was purchased for pulling in loads from broken down truck and delivering them to a safe location of the trucker's and/or company's choice.
SEE PHOTO BELOW!
2001 Kenworth T800 (BIG KENNY) W/Century 7035 Wrecker bed & Wheel Lift along with underlift/ axle lift and 35 Ton intergrated boom & dual 35000 lb winches. It has a N14 460 hp Cummins engine and a 13 speed transmission.
Thanks go out to Bob Crouch at Crouch's Wrecker Sales, Jerry Riggs at Hillbilly Harriett's Chrome Shop (for all of the chrome), Jesse & Jane Phillips at Napa Auto Parts (for the hoses, paint, and other odds & ends), Brent Miller at KP Graphics (for another great job of lettering & graphics) and Larry Curry at Miller Industries.
This truck was purchased on October 30, 2007. This day has another special meaning to us, it is the birth date of our father, Lee Anderson Millsaps and this year would have been his 90th birthday. Big Kenny is being dedicated in loving memory of Daddy because he was of great help in getting us started and throughout the early years of our business.
We are using this truck for towing broken down trucks and motor homes, as well as for wreck recoveries and winching. We love serving you, our customers, with the same professionalism that we strive to deliver every year.
2003 Kenworth T300 (LITTLE KENNY) W/ Vulcan 897 Wrecker bed and Wheel Lift along with underlift/axle lift. It has a Cummins engine and 6 speed transmission.This truck is used for winching out vehicles accident recovery and towing cars, light to medium duty disabled straight trucks and motor homes.We have had it since October of 2005 .
Kenny has been running calls all over the southeast U.S. and it has traveled as far as Dodge City KS. Although it isn't used as much, it is an important part of our fleet.
This truck has been a great truck and the Cummins engine has operated extremely well. Thumbs up to Kenworth, Cummins and Miller Industries.
We will miss our Freightliners, but we welcome our new equipment with great expectations.
Copyright . Friendly city auto care. All rights reserved.